A Spanish Colonial Anquera
Fig. 1. Horse anquera (detail). Gift of the Heirs of David Kimball, 99-12-20/52901. Measurements: 100 x 107 x 6 cm (39 3/8 x 42 1/8 x 2 3/8 in.)
What is it made of?
Conservators often examine objects under magnification and carry out material analysis to take a closer look at an object’s materials and technology.
This leather Anquera (horse trapping) from Mexico is beautifully embroidered with different fibers. Knowing the fiber type would assist in better understanding the object and help define the conservation treatment. Analytical techniques were used to identify silk, silver-wrapped threads, and plant fiber (perhaps Agave) cords in the intricate designs on the leather panel and flaps.
Close-up examination
Details of the horse anquera’s construction was examined using a M80 Leica stereomicroscope:
Fig. 2. Silver-wrapped cords under magnification
Fig. 3. Plant-fiber embroidery cord (left) with silver-wrapped cords under magnification
Fig. 4. Silver wrapped threads, blue/green silk using long, short satin stitch, leaf fiber (Agave) using stem stitch
Fig. 5. Metallic Trim - Measuring 7.5-8 mm wide.
This trim was hand woven on a rigid loom that held the metal threads relatively taut. The trim is warp-faced plain weave and is appliqued to leather by stitching down on each of its loom-finished edges with a pair of 2 ply S (pale yellow/ivory) silk cords. The warp and weft threads are made from a silver- alloy foil wrapped (S direction) on a silk core.t
X-Ray Fluorescence (XRF)
Fig. 6. Portable handheld analyzer applied to the silver-embroidered details.
To help identify materials X-Ray Fluorescence (XRF) analysis was carried out on the silver trim, silver wrapped cords, and likewise on the iron jingles (ruido).
XRF is used for elemental analysis to identify elements present in primarily inorganic materials such as metals, ceramics, and glass. XRF is utilizes X-ray emission and does not cause damage to the object. To examine the metallic threads of the anquera, a portable Bruker S1 Tracer III-IV Handheld XRF analyzer was used.
An example of the XRF results on the silver wrapped threads is shown below.
Fig. 7. Location of XRF analysis of silver-wrapped silk cords
Fig. 8. XRF spectra showing silver peaks on silver wrapped cords
Polarized light microscopy
To identify types of fibers used to construct the anquera polarized light microscopy was undertaken on selected fibers. Only tiny fiber samples are needed for this analysis. Light microscopy is used for identification and analysis of fibers and pigments. Characteristics of fibers can be viewed on a compound light microscope using a variety of techniques to compare with known samples for identification. For this analysis we used a digital Leica microscope attached to a laptop.
Fig. 9. Leica digital microscope (DM750) set-up with laptop
Fig. 10. Blue/green silk embroidery threads under polarized light microscopy (PLM).
Fig. 11. Wool fibers on verso under Leica microscope